IO Board Support
Type V
>Latest Patch Info
>Updating Firmware
>Installation
>>Vewlix
>>Game Menu Button
>>Powering the board
>>How to link
>>Wrong harness
>Error Codes
Type B
>Latest Patch Info
>Installation
>>blanc
>>connecting audio
>>Powering the board
>>How to link
>Type N
>Latest Patch Info
>Installation
>>Noir
>>Powering the board
>>How to link
Type V Board Support
How to install the exA-Arcadia JVS’ Type V I/O board in a VEWLIX cabinet
The exA-Arcadia JVS’ Type V I/O board is a complete drop in solution for VEWLIX cabinets equipped for JVS or FAST I/O boards.
- Ensure that the cabinet is turned off.
- Disconnect any installed I/O board and remove all wiring & screws.
- Remove the I/O and place the exA-Arcadia JVS’ Type V I/O board in its place.
- Proceed to screw in each corner.
- Connect the 60 pin black Hirose connector to (connector #)
- Connect the 4 pin JST NH connector to (connector #)
- Connect the JVS USB Type A connector to (connector #)
show the photo of an installed IO board
My VEWLIX does not the same connectors as the exA-Arcadia JVS’ Type V I/O board
VEWLIX cabinets equipped for the USB I/O board do not have the same wiring as VEWLIX setup for JVS or FAST I/O boards.
How to link 2 I/O boards
A Type A to Type B USB cable that is fully wired (one not for charging) is required.
- Connect the Type B side to the Player 1/2 I/O board.
- Run the USB cable through the back of the cabinet into the back side of the other cabinet.
- Connect the Type A side to the Player 3/4 I/O board.
show the photo of an installed IO board linked
How to power the I/O board
Connect the 4 pin JST NH connector to (connector #)
Do not use the micro USB connector to power the I/O board.
Error Message: IO Error
Please read the System Support Error page for the IO Error resolution.
Type B Board Support
How to install the exA-Arcadia JVS’ Type B I/O board and conversion kit in a blanc cabinet
The exA-Arcadia JVS’ Type B I/O board is a JVS solution for blanc cabinets.
- Ensure that the cabinet is turned off.
- Remove the back panel behind the monitor.
- Attach the I/O and secure the exA-Arcadia JVS’ Type B I/O board.
- Proceed to screw in each corner.
- Connect the 60 pin black Hirose connector to (connector #)
- Connect the 4 pin JST NH connector to (connector #)
- Connect the JVS USB Type A connector to (connector #)
- Connect the RCA audio connectors from the I/O board to the audio board.
show the photo of an installed IO board
How to link 2 I/O boards
A Type A to Type B USB cable that is fully wired (one not for charging) is required.
- Connect the Type B side to the Player 1/2 I/O board.
- Run the USB cable through the back of the cabinet into the back side of the other cabinet.
- Connect the Type A side to the Player 3/4 I/O board.
show the photo of an installed IO board linked
How to power the I/O board
Connect the 4 pin JST NH connector to (connector #)
Do not use the micro USB connector to power the I/O board.
Error Message: IO Error
Please read the System Support Error page for the IO Error resolution.
Type N Board Support
How to install the exA-Arcadia JVS Type N link board in a Noir cabinet
Coming soon.
Error Message: IO Error
Please read the System Support Error page for the IO Error resolution.
Request Support
Provide the serial # for each product in your request for the quickest service.